3d-robotics PPM Encoder Bedienungsanleitung PDF herunterladen

PPM encoder module

Translates up to eight PWM (pulse width modulation)

signals into one PPM (pulse position modulation) signal,

allowing you to connect a PWM receiver to a PPM-

compatible autopilot over one wire

Three-wire cable (12 cm)

DF13 three-position to servo cable connects

the encoder to the autopilot

Ten-wire cable (7 cm)

DF13 ten-position to servo cable connects

the PWM receiver to the encoder

Connect the ten-wire cable to

the encoder’s ten-position port.

Connect each wire to your RC receiver. Connect

the red wire to power, the black wire to ground,

and the white wires to channels one through

eight as shown below.

Channel 1

Channel 2

Channel 3

Channel 4

Channel 5

Channel 6

Channel 7

Channel 8

Power

Ground

PPM ENCODER

Connect a PPM receiver

1 2 3

Inhaltsverzeichnis

Seite 1 - Connect a PPM receiver

PPM encoder moduleTranslates up to eight PWM (pulse width modulation) signals into one PPM (pulse position modulation) signal, allowing you to connect

Seite 2

signal (s) white wire power (+) red wireground (-) black wireConnect a PPM jumper (included with APM) to signal pins 2 and 3. Connect thre

Seite 3 - Conﬁguration

For customer support, contact us at [email protected] or call our support line at +1 (858) 225-1414 Monday through Friday, from 8 am to 5 pm, PST.PPM Encod

Kommentare zu diesen Handbüchern

Keine Kommentare

3d-robotics PPM Encoder Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware 3d-robotics PPM Encoder herunter. 3D Robotics PPM Encoder User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware 3d-robotics PPM Encoder